View APT2X101DQ120J_1211508.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2
3
2
3
1
2 4
3
1
4
1
4
Anti-Parallel APT2x100DQ120J
Parallel APT2X101DQ120J
ISOTOP (R)
SO
2 T-
27
(R)
"UL Recognized"
file # E145592
APT2X101DQ120J 1200V 100A APT2x100DQ120J 1200V 100A
DUAL DIE ISOTOP(R) PACKAGE
ULTRAFAST SOFT RECOVERY RECTIFIER DIODE
PRODUCT APPLICATIONS
* Anti-Parallel Diode
-Switchmode Power Supply -Inverters * Free Wheeling Diode -Motor Controllers -Converters * Snubber Diode
PRODUCT FEATURES
* Ultrafast Recovery Times * Soft Recovery Characteristics * Popular SOT-227 Package * Low Forward Voltage * High Blocking Voltage * Low Leakage Current * Avalanche Energy Rated
PRODUCT BENEFITS
* Low Losses * Low Noise Switching * Cooler Operation * Higher Reliability Systems * Increased System Power
Density
* Uninterruptible Power Supply (UPS) * Induction Heating * High Speed Rectifiers MAXIMUM RATINGS
Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM EAVL TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage
All Ratings: TC = 25C unless otherwise specified.
APT2x101_100DQ120J UNIT
Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage Maximum Average Forward Current (TC = 88C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45C, 8.3ms) Avalanche Energy (1A, 40mH) Operating and StorageTemperature Range Lead Temperature for 10 Sec.
1200
Volts
100 127 1000 20 -55 to 175 300
mJ C Amps
STATIC ELECTRICAL CHARACTERISTICS
Symbol Characteristic / Test Conditions IF = 100A VF Forward Voltage IF = 150A IF = 100A, TJ = 125C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V
APT Website - http://www.advancedpower.com
MIN
TYP
MAX
UNIT
2.4 2.65 1.8
3.0
Volts
6-2005 053-4230 Rev A
VR = 1200V VR = 1200V, TJ = 125C
100 500 110
A pF
DYNAMIC CHARACTERISTICS
Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 100A, diF/dt = -1000A/s VR = 800V, TC = 125C IF = 100A, diF/dt = -200A/s VR = 800V, TC = 125C IF = 100A, diF/dt = -200A/s VR = 800V, TC = 25C Test Conditions IF = 1A, diF/dt = -100A/s, VR = 30V, TJ = 25C MIN -
APT2x101_100DQ120J
TYP MAX UNIT ns nC
45 385 1055 6 480 5240 19 210 9345 70 -
-
Amps ns nC Amps ns nC Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol Characteristic / Test Conditions RJC VIsolation WT Junction-to-Case Thermal Resistance RMS Voltage (50-60hHz Sinusoidal Wavefomr Ffrom Terminals to Mounting Base for 1 Min.) Package Weight MIN TYP MAX UNIT C/W Volts
.32 2500 1.03 29.2 10 1.1
oz
g lb*in N*m
Torque
Maximum Mounting Torque
APT Reserves the right to change, without notice, the specifications and information contained herein. 0.35 , THERMAL IMPEDANCE (C/W) 0.30 0.25 0.20 0.5 0.15 0.10 0.05 0 10 0.3 0.1 0.05
-5
D = 0.9 0.7
Note:
PDM
t1 t2
JC
SINGLE PULSE 10
-4
Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC
t
Z
10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
RC MODEL Junction temp (C) 0.0308 0.00101
6-2005
Power (watts)
0.0693
0.0299
053-4230 Rev A
0.219 Case temperature (C)
0.309
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
TYPICAL PERFORMANCE CURVES
300 250 200 TJ = 175C 150 100 50 TJ = -55C 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 12000 Qrr, REVERSE RECOVERY CHARGE (nC) 10000 8000 6000 50A 4000 2000 0
T = 125C J V = 800V
R
600 trr, REVERSE RECOVERY TIME (ns) 500 400 300 200 100 0
APT2x101_100DQ120J
T = 125C J V = 800V
R
150A
IF, FORWARD CURRENT (A)
100A 50A
TJ = 125C TJ = 25C
0
0
0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/s) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 80 70 60 50 40 30 20 10 0
T = 125C J V = 800V
R
150A 100A
150A
100A
50A
0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.4 Kf, DYNAMIC PARAMETERS (Normalized to X000A/s) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 Qrr Qrr
0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 5. Reverse Recovery Current vs. Current Rate of Change 160 140 120 IF(AV) (A) 100 80 60 40 20 75 100 125 150 175 Case Temperature (C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 25 50
Duty cycle = 0.5 T = 175C
J
trr trr IRRM
25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 6. Dynamic Parameters vs. Junction Temperature 800 CJ, JUNCTION CAPACITANCE (pF) 700 600 500 400
200 100 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 0 1
053-4230 Rev A
6-2005
300
APT2x101_100DQ120J
Vr +18V 0V D.U.T. 30H
trr/Qrr Waveform
diF /dt Adjust
APT75GP120
PEARSON 2878 CURRENT TRANSFORMER
Figure 9. Diode Test Circuit
1 2 3 4
IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero
1
4
5 3 2
trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr.
0.25 IRRM
5
Figure 10, Diode Reverse Recovery Waveform and Definitions
SOT-227 (ISOTOP(R)) Package Outline
31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places)
r = 4.0 (.157) (2 places)
4.0 (.157) 4.2 (.165) (2 places)
25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504)
3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594)
6-2005
1.95 (.077) 2.14 (.084)
Anti-parallel
APT2x100DQ120J
Parallel
APT2X101DQ120J
30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504)
Anode 2
Cathode 1 Cathode 1
Anode 1
053-4230 Rev A
Dimensions in Millimeters and (Inches)
Cathode 2
Anode 1
Cathode 2
Anode 2
ISOTOP(R) is a Registered Trademark of SGS Thomson. APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.

▲Up To Search▲

Price & Availability of APT2X101DQ120J

	To Download APT2X101DQ120J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .